THATCAT Camera Support
250 N. HENRY ST.
BROOKLYN NY 11222
RENTALS@THATCAT.COM
(718) 389-3585

Chapman Leonard Super Pee Wee IV+ Dolly

Add to Quote

PACKAGE

Package

Pee Wee IV+ Camera Dolly
Four-Way Leveling Head with Swing Knob
Universal Wrench
(8) Medium Tires with Quick Tire Change Clips & Countersunk Caps
Shifting Column
Tracking Bar
Valve Control Handle
Knee Bumper
Accessory Cart with Plastic Cover
12” Camera Riser with Castle Ring
Low Mode Plate with Plastic Cap
(2) 12” Tracking Bar Extensions
(2) Seats with 2-Lock Knobs & 2-Locking Pins
Seat Offset Arm with 6” Long Post
(2) 12” Dolly Seat Risers
(2) Front Lifting Bars-Short
(2) Rear Lifting Bars-Long
(2) Short Side Boards (Left & Right) with 4 Screws
(2) Side Boards (Left & Right) with 4 Bolts
Standing Board
(2) Upper Support Boards (Left & Right) with 2 Allen Screws & 2 Wing Nut Screws
(2) Lower Support Boards (Left & Right) with 2 Allen Screws & 2 Wing Nut Screws
(2) Star Plates with 2 Screws
Upper Front Board with 1 Allen Screw & 1 Wing Nut Screw
Lower Front Board with 1 Allen Screw & 1 Wing Nut Screw
(3) MI Boards (Left, Right & Front) with 4 Screws
(2) Full Filler Plates
(2) Quarter Filler Plates
Quick Jack with Insert Peg
Grip Pouch (2nd Model)
6” Camera Riser with Castle Ring
3” Camera Riser with Castle Ring
24” Camera Offset Plate with 2 Washers and 1 Nut & Bolt

FEATURES

Features

  • Revolutionary three mode transmission: conventional, crab and round steering
  • Incorporates a steering column with clutch
  • Ability to shift while the dolly is moving or stationary
  • New rigid silent chain driven arm
  • Transmission allows perfect steering geometry when configuring the chassis to its various leg positions
  • Works on Both Straight and Curved Tubular Track
  • Less maintenance plus openings for easy access
  • Variety Of Tires Available To Accommodate Different Terrains
  • Need for air bleeding eliminated
  • Corrosion resistance improvement
  • Larger hydraulic capacity that requires less recharging
  • Arm provides greater operator clearance with greater rigidity, smoothness, speed & added vertical travel
  • Arm allows for lower camera set up
  • Valve concept allows for easy control & provides a greater speed with added precision
  • Stop valve requires no tools for adjustments to Universal Head
  • Rear Controlled Steering
  • Corrected Steering Geometry
  • New light weight aluminum side board system
  • Side board system that provides a complete walk-a-round ability at both high & low level
  • Built in heat control for the hydraulic system to maintain temperature of hydraulic fluid

SPECIFICATIONS

Specifications

Max Camera Mount Height (Position 1-90 Degree Mode) 5 ft. 1/2 in. 1.53 m
Min Camera Mount Height (Position 1-90 Degree Mode) 27 1/4 in. 69 cm
Vertical Boom Travel (Position 1-90 Degree Mode) 33 1/4 in. 84 cm
Max Camera Mount Height (Position 2-45 Degree Mode) 4 ft. 10 1/2 in. 1.48 m
Min Camera Mount Height (Position 2-45 Degree Mode) 26 in. 66 cm
Vertical Boom Travel (Position 2-45 Degree Mode) 33 1/4 in. 84 cm
Maximum Camera Mount Height (Position 3-Low Mode) 4 ft. 3 in. 1.3 m
Minimum Camera Mount Height (Position 3-Low Mode) 19 in. 48 cm
Vertical Boom Travel (Position 3-Low Mode) 33 1/4 in. 84 cm
Max Camera Mount Height (Position 4 – Extender Mode) 5 ft. 1/2 in. 1.53 m
Min Camera Mount Height (Position 4 – Extender Mode) 19 in. 48 cm
Vertical Boom Travel (Position 4 – Extender Mode) 41 1/4 in. 1.05 cm
Min Camera Mount Height (Low Bar w/4-Way Leveling Head No Rise) 4 1/2 in. 11 cm
Max Camera Mount Height (Low Bar w/4-Way Leveling Head No Rise) 3 ft. 1 in. 94 cm
Chassis Width – All Legs at 0º (Use in Tight Quarters) 20 in. 51 cm
Chassis Width – All Legs at 10º (Pneumatic or 880 mm Track Position) 25 in. 64 cm
Chassis Width – All Legs at 45º (Track Position) 28 in. 71 cm
Chassis Width – All Legs at 70º (Tread and Wheel Base Are Equal Position) 32 in. 79 cm
Chassis Width – All Legs at 84º (Sideways or Scissors Track Position) 32 3/4 in. 81 cm
Chassis Width – Front Legs at 84º/Rear at 0º (3 Point Med Tire Position) 32 3/4 in. 81 cm
Chassis Width – Front Legs at 84º/Rear at 10º (3 Pt. Pneumatic Tire Position) 32 3/4 in. 81 cm
Chassis Width – Front Legs at 180º/Rear at 0º (Compact Med Tire Position) 20 in. 51 cm
Chassis Width – Front Legs at 170º/Rear at 10º (Compact Pneumatic Tire Position) 25 in. 64 cm
Steering Post Height 35 in. 89 cm
Minimum Chassis Length 2 ft. 10 in. 87.6 cm
Maximum Chassis Length 3 ft. 10 in. 1.09 m
*Maximum Payload with Accumulator Charge at 2,400psi 320 lb 145 kg
*Maximum Payload with Accumulator Charge at 2,600psi 350 lb 159 kg
**Maximum Payload with High Post Kit 1,100 lb 499 kg
Maximum Number of Lifts on a Single Charge 5 lifts
Accumulator Charging Time (Empty to Full) 60 sec.
Carrying Weight 295 lb 134 kg
Operational Weight 329 lb 149 kg
Operation Weight w/ High Post Kit (w/o Payload) 386 lb 175 kg
* Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Arm
** Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount

DIMENSION DRAWINGS

Dimension Drawings