THATCAT Camera Support
250 N. HENRY ST.
BROOKLYN NY 11222
RENTALS@THATCAT.COM
(718) 389-3585

Chapman Leonard Super Pee Wee IV Dolly

Add to Quote

PACKAGE

Package

Super Pee Wee IV Camera Dolly
Four-Way Leveling Head w/ Swing Knob
8- Medium Tires w/ 8- Quick Tire Change Clips & Countersunk Caps
Shifting Column
Valve Control Handle
Universal Wrench
Tracking Bar w/ 2- End Plugs
Knee Bumper
Accessory Cart w/ Plastic Cover
12″ Camera Riser w/ Castle Ring
Low Mode Plate
2- 12″ Tracking Bar Extensions
2- Seats w/ 2- Lock Knobs & 2- Locking Pins
Seat Offset Arm (6″ long post)
2- 12″ Seat Risers (long post)
2- Front Liftings Bars (short)
2- Rear Lifting Bars (long)
2- Full Side Boards (Left & Right)
2- Side Boards (Left & Right) w/ 4- Bolts each
Standing Board
2- Upper Support Boards (Left & Right) w/ 1- Screw each
2- Lower Support Boards (Left & Right) w/ 1- Screw each
2- Star Plates w/ 2- Screws Each
Upper Front Board w/ 2- Screws
Lower Front Board w/ 2- Screws
2- Rear Extension Boards (Left & Right)
2- Full Filler Plates
2- Quarter Filler Plates
3- MI Boards (Left, Right & Front) w/ 4- Screws total
6″ Camera Riser w/ Castle Ring
3″ Camera Riser w/ Castle Ring
Grip Pouch w/ User Guide
24″ Camera Offset Plate w/ 2- Washers + 1- Nut & Bolt

FEATURES

Features

 

  • Revolutionary new three mode transmission featuring conventional, crab and round steering that can be shifted while the dolly is moving or stationary, without the dolly operator’s hands leaving the steering handle.  This transmission has the ability to be adjusted to provide perfect steering geometry when reconfiguring the chassis to its various leg positions.   No other transmission has been able to do this.
  • The Super PeeWee® IV now provides for much less maintenance.
    • The need for air bleeding has been eliminated.
    • Corrosion resistance has been dramatically improved.
    • All exposed working joints have been sealed.
    • Far greater precision greatly reduces the need for adjustments. All adjustments, if required by operator’s specific desires, can be done externally without removing bolted covers or lids.
    • Steering chain adjustments have been virtually eliminated, dramatically reducing maintenance time.
    • Larger hydraulic capacity requires less recharging.
    • Greater strength reduces the possibility of damage.
    • Modular design of steering transmission and shifting linkage facilitates quick and easy replacements.
  • New arm design provides greater operator clearance, while assuring greater rigidity, smoothness, speed and added vertical travel. This new trim arm design also allows for lower camera setups when the camera is located above the chassis. All edges and corners are rounded to provide for greater operator comfort.
  • New valve concept gives the operator much improved control, providing for greater speed with added precision.
  • Stop valve now requires no tools to make adjustments. Accessibility is now directly in front of the dolly operator, providing for quick and easy adjustments.
  • Improved Universal Head performance is now achieved. Added arm precision, a control cylinder and a middle rib provides major gains in safety and rigidity.
  • The Super PeeWee® IV has a new side board system. Feedback from thousands of users and our own survey has led to this new design that provides complete walk-a-round ability at both the high and low levels.
  • Leg positions have been improved to enhance performance by providing:
    • 0º position for narrowest configuration with standard tires.
    • 10º position for narrowest configuration with pneumatic tires OR for side mounting the dolly on 880 mm track.
    • 44º position for standard 24½” track alignment and general all-around use.
    • 84º position for maximum lateral stability or for side mounting dolly on 24½” track.
    • Front legs at 84º, rear legs at 0º. This is the three-point contact position for standard tires which is great for outdoor use on rough terrain.
    • 70º position where Tread and Wheel Base are Equal, called the S position.
    • Front legs at 84º, rear legs at 10º. This is the three-point contact position for pneumatic tires, which is great for outdoor use on rough terrain.
    • Front legs at 180º and the rear legs at 0º provides the most compact dolly configuration with Standard Solid Tires, making the Super PeeWee® IV efficient, even in especially tight quarters.
  • The Super PeeWee® IV now comes with built-in heat control for the hydraulic system to maintain a minimum hydraulic oil temperature of 70°F, thus providing constant performance, even in the coldest environments.
  • Many Accessories Available.

SPECIFICATIONS

Specifications

Max Camera Mount Height (Position 1-90 Degree Mode) 5 ft. 1/2 in. 1.53 m
Min Camera Mount Height (Position 1-90 Degree Mode) 27 1/4 in. 69 cm
Vertical Boom Travel (Position 1-90 Degree Mode) 33 1/4 in. 84 cm
Max Camera Mount Height (Position 2-45 Degree Mode) 4 ft. 10 1/2 in. 1.48 m
Min Camera Mount Height (Position 2-45 Degree Mode) 26 in. 66 cm
Vertical Boom Travel (Position 2-45 Degree Mode) 33 1/4 in. 84 cm
Maximum Camera Mount Height (Position 3-Low Mode) 4 ft. 3 in. 1.3 m
Minimum Camera Mount Height (Position 3-Low Mode) 19 in. 48 cm
Vertical Boom Travel (Position 3-Low Mode) 33 1/4 in. 84 cm
Max Camera Mount Height (Position 4 – Extender Mode) 5 ft. 1/2 in. 1.53 m
Min Camera Mount Height (Position 4 – Extender Mode) 19 in. 48 cm
Vertical Boom Travel (Position 4 – Extender Mode) 41 1/4 in. 1.05 cm
Min Camera Mount Height (Low Bar w/4-Way Leveling Head No Rise) 4 1/2 in. 11 cm
Max Camera Mount Height (Low Bar w/4-Way Leveling Head No Rise) 3 ft. 1 in. 94 cm
Chassis Width – All Legs at 0º (Use in Tight Quarters) 20 in. 51 cm
Chassis Width – All Legs at 10º (Pneumatic or 880 mm Track Position) 25 in. 64 cm
Chassis Width – All Legs at 45º (Track Position) 28 in. 71 cm
Chassis Width – All Legs at 70º (Tread and Wheel Base Are Equal Position) 32 in. 79 cm
Chassis Width – All Legs at 84º (Sideways or Scissors Track Position) 32 3/4 in. 81 cm
Chassis Width – Front Legs at 84º/Rear at 0º (3 Point Solid Tire Position) 32 3/4 in. 81 cm
Chassis Width – Front Legs at 84º/Rear at 10º (3 Pt. Pneumatic Tire Position) 32 3/4 in. 81 cm
Chassis Width – Front Legs at 180º/Rear at 0º (Compact Solid Tire Position) 20 in. 51 cm
Chassis Width – Front Legs at 170º/Rear at 10º (Compact Pneumatic Tire Position) 25 in. 64 cm
Steering Post Height 35 in. 89 cm
Minimum Chassis Length 2 ft. 10 in. 87.6 cm
Maximum Chassis Length 3 ft. 10 in. 1.09 m
*Maximum Payload with Accumulator Charge at 2,400psi 320 lb 145 kg
*Maximum Payload with Accumulator Charge at 2,600psi 350 lb 159 kg
**Maximum Payload with High Post Kit 1,100 lb 499 kg
Maximum Number of Lifts on a Single Charge 5 lifts
Accumulator Charging Time (Empty to Full) 60 sec.
Carrying Weight 295 lb 134 kg
Operational Weight 329 lb 149 kg
Operation Weight w/ High Post Kit (w/o Payload) 386 lb 175 kg
* Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Arm
** Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount
 

 

 

 

 

DIMENSION DRAWINGS

Dimension Drawings